high pressure fuel pump manufacturers piston pump applications and repair methods

    Disassemble the rolling bearing, using the measurement, such as found that the surface of the roller bearing has scratches or colour loss, there will be replaced. In the replacement of rolling bearing, need to stay rolling bearing English letters and types, gear pump rolling bearing most of the use of large load volume rolling bearing, acquisition of the original manufacturer, the original specification of the product, assuming the replacement of another well-known brand, should seek advice on rolling bearing qualified staff query table exchange, the purpose is to adhere to the rolling bearing and load volume.

    Korakan oil pump Manufacturer piston pump application and repair methods.

    Straight shaft inclined disc type gear pump is divided into two types of self-priming oil type provided by the working pressure. Most of the hydraulic piston pumps use a standard air pressure oil tank and also have a Korak oil pump with a charge brake pump to provide working pressure oil to the inlet hole of the Korak oil pump. Self-priming oil pumps are self-priming and have no external force to provide oil. The hydraulic oil cartridge of the oil provided by the standard air pressure, after each time the high pressure Diesel pump carries out the equipment, wait for the hydraulic machine impregnation box to arrive at the application of the standard air pressure before the actual operation of the mechanical equipment. If the standard air pressure of the hydraulic oil cartridge is lacking, it will cause abnormal damage to the sliding whip and the pull-off scenery in the Korakor oil pump manufacturer and to the round-trip plates and pins in the pump. After the application of the gear pump which uses the oil provided by the gasoline pump, the actual operating staff needs to inquire about the gear pump 1-2 times a day to see if the working arrangement of the Korakan oil pump manufacturer is all normal. If it is found that the rate of the hydraulic system is reduced or bogged down, the position of the gear oil pump within the make-up petrol pump should be queried whether it is too large.

    Korotor oil pump Manufacturer with rolling bearings

    The components of the gear pump are rolling bearings, assuming that the rolling bearings have a side gap, it is not possible to promote Korak oil pump 厂家 three pairs of friction vice all the normal position, together with the destruction of each friction vice of the hydrostatic machine support floating oil thin, reduce the application of gear pump rolling bearing service life. According to the material provided by the manufacturer of Koran oil pump, the uniform application service life of rolling bearing is 10000h. dismantled out of the rolling bearing, there is no enquiry instrument and equipment is unable to inquire the bearing, only adopt the measurement, such as found roller bearing surface has or lose colour, there will be replacement.